| Cable Length: | 1.5 Meters |
| Connector Type: | USB (Type A) |
| Firmware Revision: | 1.40 |
| Host Interface: | USB 2.0 Compliant, Full Speed USB, Low bus powered device |
| Human Interface (LED): | Unit has one green LED that can have the following states: Off - Unit has no power, On - Unit is powered, Blinking - Smart Card Activity |
| Input Current: | Unconfigured - 56 mA, Configured - 55 mA, Suspend - 460 uA, Operating - 53 mA |
| Input Voltage: | 5 VDC |
| Memory: | Size of Flash Memory - 32 Kbytes, Flash Memory is field upgradeable |
| PCB Rev: | 3.2 |
| Physical Dimensions (H x W x D): | 15 x 68 x 82 (mm) |
| Power Requirements: | Powered Via USB Bus |
| Smart Card Connector: | 8 contacts - ISO location, Friction contacts, Certified for 100,000 insertions, Sliding contact, Compatible with EMV 3.1.1 and ISO 7816-1 |
| Smart Card Interface: | T=1, T=0 protocol support, Communication speed up to 153,600 bps (PPS, FI parameter), Programmable Clock Factor, Frequency up to 12 MHz (PPS, DI parameter), Support ISO 7816 Class A and AB smart card, Embossed Smart Card Support, Automatic Smart Card Inse |
| Weight (Kg): | 0.1 |